BB_Co logo

BB_Co logo
very little relationship to how the Ballistic Breaker works.

Thursday, December 1, 2011

Utility US Patent Application Filed on Ballistic Breakers™

I filed my US patent application on Ballistic Circuit Breakers™ yesterday. Here is an excerpt which does not reveal any of the newest concepts that I introduced in my patent application. The concepts in this excerpt were covered in prior provisional patent applications, and subsequently discussed in my CleanTech Open semifinal pitch deck (October 3, 2011), and also in my presentation to the Seventh Conference on Clean Energy on November 1, 2011.

Saturday, November 19, 2011

BB_Co getting traction with VCs

I have had invitations from three venture capital firms who have asked me to make a pitch on Ballistic Breakers. This is a completely different experience than I had with trying to sell elpipes to the VCs. In the case of elpipes, all the VCs were unanimous, saying that these high capacity underground HVDC powerlines are "too big & too long term."

Tuesday, November 8, 2011

Ballistic Breaker Corporation incorporated in DE

Ballistic Breaker Corporation was incorporated in Delaware, as a C-Corporation on November 4, 2011. This is in preparation for seeking funding, beginning in December (after filing of the utility patent based on the first three provisional patents).

Sunday, October 23, 2011

Preparations for the 7th Conference on Clean Energy (Greenovation conference)

I gave my practice pitch to Abi Barrow in preparation for my November 1 investor pitch. Bill Brockmeyer (CTO) and Matt Koenig (sales & marketing) were present at my practice session October 20, and I also expect them to be there at the Greenovation conference. She had helpful advice, as did Matt & Bill, which I will incorporate. The ten minute pitch to the Greenovation conference does not allow time for questions, unlike the past several pitches I have made (so there is no sense in having back-up slides). I will also have a poster session after the talk; in one past year, Governor Patrick did a walk-through. Here is my first draft of a poster.

Thursday, October 13, 2011

Seventh Conference on Clean Energy (Greenovation 2011)

I will be pitching at this conference, which I prefer to call the Greenovation Conference; I got great contacts out of this experience in the last two years I pitched there. In previous years, I was pitching Electric Pipeline Corporation (, but I have now accepted that this is too big & too long term to be VC fundable.

This year, I'm pitching the Ballistic Breaker Company (; our patent-pending Ballistic Breakers™ allow MVDC grids which then enable simpler DC microgrids (DC microgrids containing many generators do not need to synchronize each generator to the grid; DC also simplifies battery backup) to grow to larger size (~80MW, I estimate).
Ballistic Breakers™ are also useful for conventional power delivery for factories, ships, mines, offshore drilling rigs and isolated communities (using DC power delivery saves on both capital costs and energy costs, especially where a large portion of the load is for variable speed motors, as in material processing plants, ships, drilling rigs, and mines).

Our first product will be designed for 6.6kV, which is double the highest DC voltage used commercially today (3.3kV DC power delivery to electric trains has been practiced for many years in Russia and the countries of the former Soviet Union).

Wednesday, October 12, 2011

Significance of Ballistic Breakers™ for the Atlantic Wind Connection

The Atlantic Wind Connection (AWC) can only be built as planned if there is a workable DC circuit breaker. I have not been able to determine definitively what kind of DC breaker is planned for this project, but the fact that ABB presented this paper at the ARPA-E  Green Electricity Network Integration (GENI) conference December 13, 2010  means that IGBT based breakers are at least under active consideration. I'd hate to have to rely on IGBT-based circuit breakers, for numerous reasons:
  • cost;
  • disastrous failure mode which essentially requires full redundancy for each breaker + flawless maintenance practices;
  • poor resistance to overcurrent;
  • on-state losses (which depend on power transmitted; these losses follow Ohm's Law). 
It might be possible to get away with IGBT-based circuit breakers on the AWC (see below figure), because there will only be a total of 11 or so power taps on the AWC (including offshore wind farms which are not shown in the figure below); but building a supergrid based on IGBT circuit breakers is a non-starter. In order to build a reliable, redundant HVDC grid, one needs not only DC circuit breakers at each tap, but also at least a few trunk line circuit breakers. IGBT-based approaches to trunk line circuit protection imply high losses, comparable to all other transmission losses, if there is a main line circuit breaker between each next neighbor set of power taps, as is necessary for maximum reliability and redundancy.
Our patent pending Ballistic Breaker™ does not use semiconductors to break the circuit (here is an executive summary). Ballistic Breakers™ work equally well for AC or DC power, and do not ignite an arc while breaking the circuit. They can scale to any voltage and current (though the higher the voltage, the more time it takes to open the circuit). Ballistic Breakers™ could have been invented 120 years ago, but they were not, because the entire Electrical Intelligentsia turned their attention from DC to AC around 1890. It is actually MORE valuable, because at the core, it is simple.

I believe my elpipe technology (described in the attached paper I presented to the Power and Energy Society at their July meeting in Detroit) is a complementary technology to offshore power lines. Elpipes enable high capacity underground HVDC transmission; there would be a large reliability boost if the two ends of he AWC could be tied into a land-based HVDC line that "completes the loop." Electrical loops are "self-redundant" because any pair of taps on the loop are connected in two directions: clockwise and counter-clockwise, as long as there are circuit breakers between each next-neighbor set of power taps (as described in my PES paper and this more recent discussion of highly redundant HVDC grids based on elpipes in China). Ballistic Breakers™ can be economical enough, plus they have negligible on-state losses, so that power may travel through many Ballistic Breakers™ between where it is generated and where it is used, as is needed to create a fully redundant DC loop. But I know we must crawl before we can walk, so my initial development effort for Ballistic Breakers™ is aimed at 6kV DC, not at HVDC applications like AWC.

The Atlantic Wind Connection and Tres Amigas are the two most innovative transmission projects in North America, I think. I very much want both of of these projects to succeed.